More tiled Ortelius

The bathroom will now be a place where you can lie and journey to places which indeed exist but not in our time. A time when Papua New Guinea was massively out of proportion, when ships were firing cannons at each other (oh, wait, they still do), when the Suez Canal had not yet been dug, and strange sea creatures surrounded Iceland. Magellan had just failed to return on his journey on the Victoria, pictured below. Or rather, the Victoria returned with all the information, but Magellan himself didn’t. You can’t have everything. The imagined coastline of Terra Australis in yellow underneath the Victoria, which connected with Tierra del Fuego in South America. Of course.

maptiles5iceland iceland2 iceland3There are explanaitons covering Iceland and it is needed. Such a complex place, with danger in volcanoes, poral bears on icefloes, animals which will kill you if you eat them, glaciers, seacows. Rudimentary knowledge of latin helps here. Pour more hot water in the bath, the perpetual nives is making me cold!

And no, I haven’t made any of it up. It is all a gridded copy of Abraham Ortelius maps, with maybe just a little rearranging of ships to fit, and cropping. The little fat thing with horns below, for instance. I take no responsibility, blame Ortelius. It is possible that I am repeating myself, I have written about the maps before and it will probably not be the last time either.

maptiles3 maptiles2 maptiles

Medieval map tables – painting the map

Whilst I was working on these at my studio gallery many people asked about the process of making them. This is for you.

Old maps convey a sense of love of a place, love of the map itself. They make me want to go there, even if it is only for a little bit of time travel. To make a map table, start with a sturdy surface. I used a selection of kitchen benchtop offcuts. I had to buy a whole sheet when I steel wrapped the benchtops at the Pip, and there were several pieces going spare. Make it easy, use an existing piece of furniture! No need to make anything at all.material3Prepare your surface with gesso, I used 5-6 coats, rubbed down finely with sandpaper. Do not use undercoat, MUST be gesso. This is because I am going to paint with a watery colour, which will not take to a plastic surface. Gesso dries with a wonderful ability to take paint. It is what it’s for! I recommend priming a scrap  for you to try your brushwork and colours on. A word of caution: I ran out of my ordinary gesso half way through and had to get some from a non-art dealer, student/craft type of brand. This is NOT gesso, despite what it says on the tin. I bought Montmartre as there was no choice unless I wanted to drive 40 mins. Their brushes are fine but honestly, the gesso remains sticky, feels like plastic, does not rub down as it should, doesn’t take the paint or even texters. No. I have now to sand everything back and start again. A pain as I have spent literally hours on prepwork and sketching, thinking it would turn out fine in the end. Just no. I am crying inside with frustration. Sigh.

Choose a map. Look for high definition images online. There are some in national library archives, antique map dealers, museums. You might not be able to fit in the whole thing, select a section and grid it up. I do 10×10 cm grids on the table top, and use a calculator to work out how big the squares have to be on the map itself. I don’t tweak landmass, but I move ships and text sometimes to make them fit in the design.

Use a VERY LIGHT pencil mark for your gridding and sketching. This is because your eraser, if overworked, will not only leave dirty smudges which you can’t remove on the gesso but it will also leave a film which makes it hard for the watercolour to take. I can barely see my marks, they are so light. Like this:


Just as well I have started to fill in the landmass of Iapan because I can’t see the pencil at all on the picture. Well, that’s the point, I guess. I use fine permanent markers. It is excellent if your hand is a bit shaky, makes a natural looking coast line! I do the coast and rivers first, then I freehand all the places and detail.

When all the lines are in place, erase the pencil, then use a weak black wash to darken all the rivers and contours, shade any trees, sails, mountains, and put a general superweak wash on the bodies of water like this. A note here, I use acrylic black, and everything else in watercolour. If you are going to use watercolour for the black, do it last or it will dirty the other colours as they touch it.



I like to colour in the outside border too at this stage.


And here is a portion of northern Europe. But what’s going on with Scandinavia? Clearly not too well charted in the 1500s. I colour in using Winsor and Newton watercolours. You could also use very weak acrylic tubes, but your paint has to be so weak and watery that your black lines are still as clear when you are done. Practise on the scrap board. Since you are painting on gesso and not on paper you will find it doesn’t bleed. Work fast as it dries quickly. Have a tissue handy to blot if too wet.


Here’s the Riviera. If you can see enough detail, you will note my favourite, Prouuuuence. Well, more ”u”s than strictly necessary anyway but I didn’t make it up, I promise. Sometimes, a ”v” is a ”u”.  I stick with the colour scheme of each map, inventing nothing. However! The mapmakers didn’t colour in the maps themselves. They would go to different people who didn’t always colour in the same way. Really, use any colour you like. There were written instructions for the colouring, for instance the instructions for Iceland said that WHITE bears were sitting on icefloes, yet some maps have BROWN bears. They thought it was a mistake. There are no white bears, surely? Who ever heard of white bears? That’s plain silly.


Here’s the coast of Tuscany, complete with ships firing cannons at each other. As you do! Note Pifa just up the river. Spellings have changed a bit.

japanChina, Korea, Japan. Or rather, Iaponiae insvlae…

An important thing is to mould the landscape using shade, it really brings it to life. You can add transparent layer over transparent layer, just let the first layer dry a bit.  It you go outside the lines a bit, it won’t matter at all as the originals did too. Go with it.


I don’t use a ruler apart from the outside edges and the grids. I know, makes things uneven. Yet… It also leaves things very lively looking. Do what you like. Many old maps have creatures in it. This one has a monkey without ears (looks like a sloth, but Ortelius had maybe never seen a real monkey) and a snail, amongst other things. The dragon/lion/hoofed animal in the forground has caught a blue scaly fish. Or maybe they are just close friends? Here is a part of Greece:

greece There’s a lot of islands in the Greek archipelago. Really. A lot.

greece2When you are done painting, you will need to seal the surface.

british channel2I varnished the English Channel only to find I managed to smudge the marker lines slightly.

The varnish can dissolve marker if you brush with any level of enthusiasm. Be careful! For a table top, I do three coats of varnish in as many days. Lightly sand with fine paper when you are done. If it is to hang on the wall, a light spray coat of varnish will be enough. In order to create a barrier between the painting and the varnish, for the next ones I sprayed a varnish on before painting the liquid varnish on, no smudges this time… Polyurethane varnish will yellow a bit over time, which will look great.

For Tuscany I also put some goldleaf in the most elaborate part. This is not as fiddly as it looks. You need to paint Goldsize (a special glue for metal leaf work) with a brush everywhere you want the metal, wait until sticky, lay on a leaf and pat it down, then brush with a dry soft brush and it will all disappear wherever you haven’t painted the goldsize. If you use metal leaf, you must varnish with oil based product, not water.



tile map…


This is what I am working on at the moment, can’t wait to see the space finished. There are several medieval maps done in tiles as an overglazing. I have copied a selection of Ortelius maps, there is one of Magellan’s final voyage in the ”Victoria” (pictured, see Terra Australis on the bottom, connecting with South America. Note how huge PNG is!), one of the Kingdom of Valencia (Spain, really), and one of the north of France with the Channel. Nearly forgot Iceland, it is full of seamonsters, volcanoes, monasteries and polar bears on icefloes. Due to the awkward shape of that wall I had to split Iceland in two, and put one half above the other. The carved wood is a part of an old fireplace surround, and the coppar is the last bit of the hot water tank I ripped apart for the kitchen floor details. The masking tape is my own, and won’t be a feature for long. I imagine candles instead reflecting a flickering glow in the warmth of the coppar. Or maybe the masking tape is JUST the finishing feature the room demands!

map2I should probably say that the tiles are painted with an overglaze, then baked on, then reassembled (I number them on the back). It works best on low grade tiles, as really expensive glazing on tiles will be less receptive to the overglazing. It is just too much fun to do. I want the whole world! Give me a bigger room… I bought seven square metres of matte white tiles on ebay, they are high quality but fine to use for the purpose. If you are uncertain of what tiles to use, should you fancy giving it a go yourself, buy one of each tile available, paint and bake, then see which tile worked best. I can show you the products I use, can even give a workshop if you wish. I think that for maps, a matte finish is the most convincing.

Here are a few shots of the Ortelius tiles.